Product Introduction
Usage
How to use the T-nut: 1. The T-nut and hexagon bolts are installed on the corner pieces without tightening. 3. The T-nut is stuck in the groove along the notch of the aluminum profile and installed with a shrapnel flat gasket. 2. It is good to tighten it with a screwdriver.
| Thread size | M4 | M5 | M6 | M8 | M10 | M12 | M16 | M20 | M24 | M30 | M36 | M42 | M48 |
| Pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 |
| Nominal | 5 | 6 | 8 | 10 | 12 | 14 | 18 | 22 | 28 | 36 | 42 | 48 | 54 |
| maximum | 4.7 | 5.7 | 7.7 | 9.7 | 11.7 | 13.7 | 17.7 | 21.7 | 27.7 | 35.6 | 41.6 | 47.6 | 53.6 |
| minimum | 4.5 | 5.5 | 7.5 | 9.5 | 11.4 | 13.4 | 17.4 | 21.4 | 27.4 | 35.3 | 41.3 | 47.3 | 53.2 |
| maximum | 9 | 10 | 13 | 15 | 18 | 22 | 28 | 34 | 43 | 53 | 64 | 75 | 85 |
| minimum | 8.5 | 9.5 | 12.5 | 14.5 | 17.5 | 21.5 | 27.5 | 33.5 | 42 | 52 | 63 | 74 | 84 |
| maximum | 2.5 | 4 | 6 | 6 | 7 | 8 | 10 | 14 | 18 | 23 | 28 | 32 | 36 |
| minimum | 2.2 | 3.5 | 5.5 | 5.5 | 6.5 | 7.5 | 9.5 | 13.5 | 17 | 22 | 27 | 31 | 35 |
| 6.5 | 8 | 10 | 12 | 14 | 16 | 20 | 28 | 36 | 44 | 52 | 60 | 70 |
Ensure that the specifications of the T-nut (such as thread size, T-groove width, etc.) are fully matched with the requirements of the bolt, T-groove, and application scenario to ensure the tightening effect and stability.
Choose the appropriate material for the T-nut based on the environmental conditions of use, such as humidity, temperature, corrosiveness, etc. For example, in humid or corrosive environments, stainless steel nuts should be preferred to prevent rust and corrosion.
Install the T-shaped nut correctly so that it can slide smoothly in the T-shaped groove and reach the expected fastening position.
When tightening, pay attention to controlling the size of the pre tightening force. Insufficient pre tightening force may result in an unstable connection, while excessive pre tightening force may damage nuts, bolts, or connected components.
Before installation, ensure that the surface of the T-nut, T-groove, and mating components is clean, free of debris, oil stains, and rust, to ensure good contact and fastening effect.
Regularly check the tightening status of the T-nut, and if it is loose, it should be re tightened in a timely manner. At the same time, check whether the nut is worn, deformed, or damaged, and replace it promptly if necessary.
Understand the load-bearing capacity of T-nuts and avoid using them beyond their rated load to prevent failure.
Use appropriate tools for installation and disassembly to avoid damage to nuts or connectors caused by improper tools.
Company Introduction
Frequently Asked Questions
QWhat materials are T-shaped nuts made of?
Depending on their machinery application, T-shaped nuts can be manufactured from carbon steel, stainless steel, non-ferrous metals, and other materials.
QWhat are the main advantages of using a T-nut?
T-nuts are easy to install and disassemble. They allow components to be positioned anywhere along the T-groove, which greatly improves assembly and labor productivity.
QHow do you choose the right material for a T-nut?
Material selection depends on the environment. For example, stainless steel nuts should be selected for humid or highly corrosive environments to prevent rust and corrosion.
QWhy is pre-tightening force control important during installation?
Insufficient pre-tightening force can cause the connection to become loose and unstable, while excessive force can damage the T-nut, bolt, or surrounding components.
QWhat industries are the company's products used in?
Our products are widely used in wind turbines, shield tunneling machines, tower cranes, petrochemicals, marine engineering, automobiles, nuclear power, rail transit, and other high-end mechanical equipment.